5/3/2023 0 Comments Canon 6d trigger flash photoxYou can do it via the touchscreen in the same way. We either press the Set button and rotate the front control dial, or else press the Q-button and dial in the amount of compensation on the scale on the rear LCD screen. It is also possible to carry out exposure compensation (EV) adjustments whilst in this mode and whilst using Auto ISO, which was not possible with the original 6D. Making changes is very quick in this manner and requires no button pressing such as is required when controlling the ISO manually. We prefer to change the aperture setting on the front control dial next to the shutter release button, and we select our shutter speed by rotating the big rear command dial. If it is too high then we quickly re-evaluate whether we can afford a slower shutter speed or if we can open up the aperture another stop. Pressing the shutter button shows up the ISO setting which is being selected. We prefer to use Manual (M) mode, with Auto ISO active which means we choose our shutter speed, we choose our aperture setting, and the camera adjusts the ISO accordingly. It is easy and intuitive to use the touchscreen, but if you have other Canon DSLR bodies that are not touch-screen equipped, it can be a little frustrating switching between them. For this setup guide we have followed the menus and controls, as not everybody will use the touch screen. For the majority of settings, there is more than one way to make selections. You can just as easily press the Q-button on the rear LCD, on the bottom left, to activate the touchscreen and then gain direct access to all settings just by tapping with your finger. Pressing the Q-button on the back of the camera, just above the rear command dial, displays the main camera settings. If you prefer, it can easily be switched off in the menus further along this setup guide. Switching between modes using the mode dial brings up a new mode dial guide which helps explain and shows the main characteristics of each mode for users new to such DSLR bodies. For now, much of our initial setup is based upon our early experience of the 6D Mark II, combined with our existing understanding of similar Canon EOS DSLR bodies like the 5D Mark III, the 5D Mark IV and the 80D. In this setup guide we share our own setup of our 6D Mark II, with the caveat that the camera is new, and we may still make some changes to the settings laid out here, as we learn the camera over time. The EOS 6D Mark II will reward the user who takes time to set up their own camera to suit their own particular style of shooting. With all these new or expanded features, comes a little added complexity. The camera has also become much more configurable, and more powerful in terms of set-up options and choices. Add to that the powerful Live View capability that comes with the swivel-tilt touch screen and Canon’s ultra-accurate Dual Pixel Auto Focus (AF). Continuous shooting speed is now up at 6.5 frames per second (fps), the buffer is reasonably deep and the autofocus now boats 45 cross-type points and is highly configurable. Some of these features mean that the new 6D Mark II becomes a much more viable camera for us as a wildlife camera. The new camera builds on that with a higher-resolution 26 megapixel sensor, further improved in low-light image quality, and many other advances and improvements. The original 6D had an excellent full-frame sensor and was known as a strong low light performer. The 6D range is Canon’s least-expensive full-frame series. Canon’s EOS 6D Mark II is a newly-released “entry-level” full frame camera that replaces the 6D.
0 Comments
Leave a Reply. |